Air75 Specs:

• Weight: 17.1g
• Wheelbase: 75mm
• Frame: Meteor75 Air
• Canopy: Air Canopy
• FC & ESC: Air Brushless Flight Controller(4IN1 Version)
• VTX: Onboard 5.8G 25mw~400mw VTX
• Camera: C03 Camera
• Reciever: ELRS Lite Receiver
• Motor: 0802SE 23,000kv
• Props: Gemfan 40mm 2-Blade Props
• Battery Connector: BT2.0 U Cable Pigtail
• Recommend Battery: LAVA 1S 260/300mAh
• Flight Time (4.35v-3.3v): 2:30 to 3:00mins with Lava 300mah

Upgrade Options

1. Canopy – As previously mentioned, one of the cons of this build is the Air Canopy. It’s not the most durable, so it will probably break within a couple of weeks of flying. Here’s my recommendation for upgrading this part:
   • 1. Extra Durability: The original Mobula 6 Canopy with the Tokyo Dom Cam Holder provides solid protection, weighing just 0.35g more than the Air Canopy. While it’s a small trade-off, the extra durability goes a long way in preventing damage during crashes. This is especially helpful for 75mm whoops, where heavier whoops lead to more momentum on impact, increasing the chance of parts breaking.
2. Motors – If you start to crave more speed, then I would recommend upgrading your motors with either Tiny Whoop or weBLEEDfpv 0802 motors

Important Note

Make sure that your Air Canopy is NOT touching the U.FL (video antenna). The section of the Air Canopy that is next to the U.FL should be snipped to prevent the canopy from breaking off the U.FL during a crash. If it is not already snipped off, then make sure to do so!!

The post Air75 BNF first appeared on Tyrantt's Pro Whooper.

Some of the links included in this build list are affiliate links. If you choose to make a purchase through any of these links, I may receive a commission, without any additional cost to you. Any commission earned will be reinvested into TPW/FPV.

Frame

Fractal 75 Kit – Use the code “Tyrantt” for 10% off

The frames are by far the most durable frame you’ll ever use. I’ve been using a prototype for the last 2 years and the carbon frame has never once broke. Once you fly with one of these frames, you’ll immediately want to add them to them to the rest of your fleet!

Flight Controller

Happy Model X12 – ELRS

I was very hesitant to try this flight controller due to how much it weighed, but boy did it surprise me! Combined with the power of the QuickSilver preset, this thing flies as smooth as butter. Seriously, it is by far the smoothest whoop I’ve ever flown. And that’s not even the best part, this thing is durable as hell. It endured 4 months of daily bashing before it started to show signs of wear. It’s worth the weight!

Ducts

Mobula 7 v4

I pair the Fractal 75 Frame with the Mobula 7 v4 Ducts.These ducts are not as durable as the v3 ducts, however, they are still durable, much lighter, and performs turtle mode significantly better. I usually repair broken ducts with welders glue and never have to worry about that spot breaking again.

Lipo

GNB – 530mah with A30 connector

This 12 gram lipo packs a real punch and can give you up to 3.5 mins of flight time with an aggressive freestyle. The A30 connector is where the real magic happens – it allows you to plug into an A30 or preexisting BT2.0 pigtail.

Motors

Tiny Whoop 27,000kv 0802 Hex

These hex motors weigh less than the standard motor and really pack a punch. These are also perfect for aggressive freestyles that need the ability to stop on a dime. What really made me fall in love with these motors is the fact that they have PCB, which allows you to easily shorten or repair the motor wires as needed.

Props

Gemfan 40mm Bi-Blades (1.0mm)

I’m a big fan of Gemfan bi-blades and have been using these for the last couple of years on all of my 75 builds. They are super smooth very responsive, which allows me rip as hard as I can

Camera

Foxeer Pico Razer – DISCONTINUED

This camera has amazing image quality and people are often surprised to learn that it’s an analog camera when they ask about it. Unfortunately, this camera is no longer being manufactured.

The post Tyrantt’s Fractal Beast 75 first appeared on Tyrantt's Pro Whooper.

Some of the links included in this build list are affiliate links. If you choose to make a purchase through any of these links, I may receive a commission, without any additional cost to you. Any commission earned will be reinvested into TPW/FPV.

Flight Controller

BetaFPV F4 1S AIO – ELRS

This is the “Light” 0.8mm version with ELRS. I’m all about convenience and prefer the solder the motor plugs to the board, but its nice to have the option to solder directly to the board. Choose the “Classic” 1.0mm version if you would rather not deal with the hassle of soldering the plugs onto the board and don’t mind the extra weight.

Frame

Happy Model Mobula 7 v4

This frame isn’t as durable as the v3 frame, however, its much lighter and performs turtle mode significantly better. I usually repair broken ducts with welders glue and never have to worry about that spot breaking again. Batteries usually don’t fit well in the battery, so I have to wrap a rubber band around the battery to hold it in place. Overall, it’s a pretty solid frame!

Lipo

GNB 530mah with A30 Connector

This 12 gram lipo packs a real punch and can give you up to 4.5 mins of flight time with an aggressive freestyle. The A30 connector is where the real magic happens – it allows you to plug into a preexisting BT2.0 pigtail, so it pairs nicely with BetaFPV flight controllers!

Motors

Tiny Whoop 27,000kv 0802 Bottle Rockets

These bottle rocket motors really pack a punch and are perfect for aggressive freestyles that need the ability to stop on a dime. What really made me fall in love with these motors is that they have PCB, which allows you to easily shorten or repair the motor wires as needed

Props

Gemfan 40mm Bi-Blades (1.0mm)

I’m a big fan of Gemfan bi-blades and have been using these for the last couple of years on all of my 75 builds. They are super smooth very responsive, which allows me rip as hard as I can

VTX

BetaFPV M03

The beauty about this VTX is that it allows you to either plug in or directly solder on a camera. It’s perfect for building whoops quickly and cleanly

Camera

Foxeer Pico Razer – DISCONTINUED

This camera has amazing image quality and people are often surprised to learn that it’s an analog camera when they ask about it. Unfortunately, this camera is no longer being manufactured.

Camera Mount

RAB FPV 3D Printed Canopy

This camera mount is worth the weight. It has multiple adjustment angles that range from 25 to 45°. It’s highly durable due to the TPU that it’s printed with and has never broke. Just make sure to place some thick double sided tape under the camera to prevent contact with the FC when crashing.

The post Tyrantt’s BeastWhoopV2 first appeared on Tyrantt's Pro Whooper.